5/5/2017: Today we updated our blog by finishing research for our pages that we needed and we added pictures to each page. We also were studying for our interview with Ms.S.
5/8/2017: During class, I put up my daily log from Friday. Our team got interviewed today and we got to test out an old ROV from last year in the mini pool. We then assigned each other jobs for building our ROV and I did research on the safety guidelines and watched the videos for pipe cutting and drilling. I also finished the last 10 minutes by reading the frame building directions since that is what I will be doing next class.
5/10/2017: Today I re read the frame guidelines, made the first prototype for our ROV and finalized how it would look . At the very end, I updated my daily log.
5/12/2017: Today I switched my job with Sam R. and I am now in charge of Motors with Quinn. I watched videos on how to solder wires and cut them. I began to work on building the motor after watching the videos with Quinn.
5/15/2017: Today I worked on the motors and finished prepping the motors to the tether and all I have left to do is solder them together using the color scheme. I also made sure to watch the videos for waterproofing them that I still also need to do next class.
5/17/2017: Today I worked on finishing the soldering but turns out we messed up and we were suppose to start the waterproofing first but good thing we didn't get to far before Ms.S told us we were doing it in the wrong steps. We still have to fix our wires and waterproof and solder.
5/19/2017: Today we worked on soldering the last of the wires and we learned how to water proof them and did't have time to finish soldering. We also messed up so we striped what we had water proofed and we are starting all over again and restarting the process again.
No comments:
Post a Comment